IP Kamera Auto tracking


WIFI, 1080P 2MP, Audio

Tomt på lager

Varenummer: 10042 Kategori:




  Model Number T03-720P T03-1080P
  Resolution   1280*720 1920*1080
  Signal System   PAL/NTSC
  Audio Input / Output   Build-in Audio / Microphone (Two Way Audio)
  Day & Night Switch   Double IR Cut Filter With Auto Switch
  Lens size   Board Lens 3.6mm/F2.0
  Minimum Illumination   0.01LUX Low,0LUX/F1.2(Led on)
  IR Distance   Up to 33ft / 10m (Depends on the Enviroment & Lens)
  PTZ   Horizontal 350 Degree, Vertical 90 Degrees
  Support TF Card   Max Up to 128GB TF Card (Don’t included)
  Recording Mode   Manually / Dynamic / Timing / Alarm
  Network   Wi-Fi/802.11/b/g(Only Support 2.4Ghz Wifi)
Motion Tracking Support
Motion Detection Support
Cloud Storage Support
  Power Supply   DC 5V
  Operating Conditions   0°-55°
  Material   ABS Plastic, Indoor Use
  Size 80*115mm
  Weight  0.3kg
  Packing list  1x Wireless IP Camera
 1x Power Supply
 1x Instructions
 1x Bottom Cover & Screws




How To Set Up The Camera

1. Download and Install the App 

a. Make sure your mobile devices are connected to the network properly (Wi-Fi)

b .For Android phone users, download the free app by searching «YCC365 plus» in «Google Play Store» or scanning the QR-Code on the camera package.

c. For iPhone or iPad users, download the free app by searching  «YCC365 plus» in «App Store» or scanning the QR-Code on the camera package.

2. Connect the Cloud IP Camera 

a. Open your APP «YCC365 plus», register a new account or log in your old account
b. Add the camera device (You can choose four ways to add your camera)
c. When your add your camera, please put your camera in a place where the wifi signal is stable (Put your phone and camera closer)


Cannot Connect To WIFI Successfully?

1.Please make sure the WIFI Password is correct.(Our Camera Only Support 2.4Ghz Wifi)

2.Please make sure the router signal is stable (place IP Camera close to your router for first connection is Recommended).The Camera will not work on a 5Ghz wireless standard at this time.  If you have a dual-band router, be sure to segregate your wireless channels and connect the Camera to the 2.4ghz channel.



Check The IP Camera: please make sure the IP Camera send Waiting for connection message after the plug. If not, we need to reset the Camera.

1.Why Reset:

Reset is used to boost the IP Camera system, which become more efficient to accept the unknown router and connect it.

Reset will erase all user settings including WIFI information, access password, alarm information, arming zones information.
2.The Steps:

       Find the reset hole at the bottom of the device, and then use needle to insert it, press it more more than three seconds after hearing «di» sound, when hearing ‘Reset to be  defaulted setting’ sound,  then  camera reset successfully.    

3.After the reset, user can start to connect it by WIFI.



FAQ -Cloud Storage Wifi Camera

1)Have to buy cloud storage service?

This camera has cloud storage and ordinary card storage capabilities, do not want to buy cloud storage, you can insert a sd card for recordings.


2)What can we do when the camera be stolen?

Do not worry,camera with cloud storage capabilities, video stored in the cloud server, the camera was stolen, the videos can be found by cloud storage account.


3)Does cloud storage camera can support recording for SD Card and cloud storage at the same time?

Yes. Support SD Card and cloud storage recordings at the same time if you put SD Card and purchase cloud storage service


4)Which cloud service company you use?Is it free ?

We use Amazon cloud server. Everyone can enjoy the cloud storage service,Which you can choose to pay for the service with a low cost.


5)How to protect privacy of individual from Cloud?         

The server Is Amazon cloud,support US-EU Safe Harbor and ISO/IEC27001:2013,it with High safety certification


Det er ingen omtaler ennå.

Bli den første til å omtale “IP Kamera Auto tracking”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *